Start a conversation

GNSS

GNSS Specific Articles and guides

  • GNSS Sensor Firmware Update

    As new firmware is released, it is always highly recommended for users to update their GS sensors (e.g.  GS14, GS18T, GS16 etc...) to the latest version.   The new firmware often will  provide have so...

  • Two button resets on GS sensors

    A lot of times, it is required that we do a clean reset/format on the GS sensors or we need to allow the sensor to track a new almanac.  Most Leica GS's have two buttons (Button A and B) and when they...

  • Apply Geoid to Coordinate System

    Apply Geoid to Coordinate System...

  • Connecting a SonarMite TM Sounder with Leica Viva GNSS

    Connecting a SonarMite TM Sounder with Leica Viva GNSS.  Please note that this is rough guide.  Best practices are to ensure that all connections working prior to initiating field work....

  • Information on the April 6, 2019 GPS week rollover

    General information GPS has its own date and time scale to express satellite positions based on counting weeks and seconds within a week. The Global Positioning System (GPS) week number rollover occur...

  • Quickstart for Determine Coordinate System

    Quickstart for Determine Coordinate System...

  • Quickstart Guide for Leica GG04 Plus

    The link below shows a basic overview and quickstart guide of GG04 Plus Smart Antenna....

  • Window Mobile Device Centre Issue

    Depending on the setup of your computer and specifically Windows 10 updates you have on your computer, the Leica USB driver may conflict with Windows Mobile Device Center. Ideally, users to download t...

  • Leica Geosystems myWorld

    As firmware and documentation changes so often, this page provides you with the links to our distribution partners online portal. This should allow our customers access to the most up to date firmware...

  • An overview of Leica cables/drivers

    With an array of cables/drivers, the attached Leica_Cable Overview provides an overview of Leica cables which can be used with GS/TS/CS devices and sensors.  Also, the How to Connect a CS... guide wil...